LoRaWAN IoT Sensor Nodes

Telemetry2U offer the Dragino range of LoRaWAN IoT Sensors. Dragino have been operating since 2010 with a strong focus on open source IoT technology. All Dragino LoRaWAN IoT products are supported and supplied by Telemetry2U, but our IoT interface is compatible with a host of other sensors, some of which you can see here.  If you have another type of sensor in mind, please get in touch with us.

IoT sensors used with Telemetry2U’s IoT Platform provide a true plug-and-play experience.  When purchased with a T2U license, nodes come ready to go, straight out of the box, no programming or complicated configuration settings necessary. You will be able to log into your Telemetry2U Account and start collecting and visualising your data immediately.  Installation is usually neat and simple, often requiring no special tools or equipment. The internal batteries provide years of operation and remove the need of a separate power supply, saving resources, space, and wires.

T2U take advantage of LoRaWAN technology to get sensor data to our IoT network servers.  LoRaWAN uses a long-range radio link for communications between the end nodes (sensors) and a Gateway(s).  The Gateway ultimately converts those radio packets into IP packets, so the data can travel over the internet to the Telemetry2U network servers.  For this reason, the gateways require some sort of internet connection, Ethernet, Wi-Fi, of 4G, as well as a power supply.  Gateways are sold separately from the nodes and must also be purchased with a license to work with T2U’s IoT Platform.  It is important to understand, that a node will not work with T2U unless it is with-in range of a Gateway configured and licensed to work with T2U.

All IoT sensor products sold by Telemetry2U are compatible with 3rd party network servers, like the TTN, but if you would like to use your IoT sensors with Telemetrt2U’s plug-and-play IoT Platform, then you will need to purchase your IoT sensor with a one-off T2U one-off license by selecting from the drop-down list.  When the IoT Sensor license is purchased, your sensors will come loaded with the latest firmware, pre-configured with the optimal settings and tested on T2U’s IoT Platform.

LHT65 LoRaWAN Temperature/Humidity IoT Sensor

The LHT65 is a long range LoRaWAN node that includes a built-in SHT20 temperature & humidity sensor and allows for easy interface with various external sensors. Telemetry2U offer multiple pre-configured options. Including a 1 meter waterproof temperature sensor, a 2 meter temperature sensor with a flat cable (ideal for fridges or freezers), a light sensor or a cable to interface to custom sensors with either an interrupt, ADC or counting sensor output. The LHT65 device is fitted with a button that can be used for power on/off control or to reset the device. LHT65 also comes with an LED to indicate connection status.


Please note that all LoRaWAN IoT Sensor nodes supplied by Telemetry2U will work with 3rd party network/application servers, like TTN, but if you would like to use your sensors on Telemetry2U’s advanced, plug-and-play IoT Platform, then you will need to purchase a license by selecting from the drop-down box below. Products purchased with a license will be shipped with the latest firmware and configuration optimised for T2U, with no programming or set-up required.

You can view a live demonstration of our IoT Platform here.
$99.00

LT-22222-L LoRaWAN I/O Controller

The LT-22222-L is a Long Range LoRaWAN I/O Controller offering multiple I/O Interfaces including: analog current inputs 4-20mA), analog voltage inputs, digital inputs, digital outputs and relay outputs. The LT I/O Modules are designed to simplify the installation of I/O monitoring while providing excellent performance.


Please note that all LoRaWAN IoT Sensor nodes supplied by Telemetry2U will work with 3rd party network/application servers, like TTN, but if you would like to use your sensors on Telemetry2U’s advanced, plug-and-play IoT Platform, then you will need to purchase a license by selecting from the drop-down box below. Products purchased with a license will be shipped with the latest firmware and configuration optimised for T2U, with no programming or set-up required.

You can view a live demonstration of our IoT Platform here.
$79.00

RS485-LN RS485/Modbus to LoRaWAN Tranceiver

The RS485-LN is a long range LoRaWAN node that provides spread spectrum communications combined with high interference immunity, whilst minimising power consumption. With the abundance of RS485/Modbus sensors available on the market, the optically isolated RS485 transceiver combined with the 7-24 Volt input range makes it suitable for many applications. Set-up is made simple via the programming port. Users can configure up to 16 custom commands that run on a time schedule, making the RS485-LN capable of communicating with multiple RS485 devices. Sensor responses can be sent individually or combined into one data record.


Please note that all LoRaWAN IoT Sensor nodes supplied by Telemetry2U will work with 3rd party network/application servers, like TTN, but if you would like to use your sensors on Telemetry2U’s advanced, plug-and-play IoT Platform, then you will need to purchase a license by selecting from the drop-down box below. Products purchased with a license will be shipped with the latest firmware and configuration optimised for T2U, with no programming or set-up required.

You can view a live demonstration of our IoT Platform here.
$139.00

LSE01 LoRaWAN Soil Moisture & EC Sensor

The LSE01 is a LoRaWAN Soil Moisture & EC Sensor for Agriculture applications. It detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the the via wireless to LoRaWAN Network. .It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses the FDR method to calculate the soil moisture, with compensation for soil temperature and conductivity.


Please note that all LoRaWAN IoT Sensor nodes supplied by Telemetry2U will work with 3rd party network/application servers, like TTN, but if you would like to use your sensors on Telemetry2U’s advanced, plug-and-play IoT Platform, then you will need to purchase a license by selecting from the drop-down box below. Products purchased with a license will be shipped with the latest firmware and configuration optimised for T2U, with no programming or set-up required.

You can view a live demonstration of our IoT Platform here.
$239.00

LGT92 LoRaWAN GPS and Motion Tracker

The Dragino LGT-92 LoRaWAN GPS tracker offers a low power GPS module combined with a 9-axis MEMS sensor (accelerator, gyroscope and compass). Its primary function is to provide motion detection and up-link the current GPS positions. It also has a emergency button that will immediately force an up-link when pressed. The power for both the GPS module and MEMS sensor are controlled by the MCU to achieve the best energy profile, but the power settings are user configurable.


Please note that all LoRaWAN IoT Sensor nodes supplied by Telemetry2U will work with 3rd party network/application servers, like TTN, but if you would like to use your sensors on Telemetry2U’s advanced, plug-and-play IoT Platform, then you will need to purchase a license by selecting from the drop-down box below. Products purchased with a license will be shipped with the latest firmware and configuration optimised for T2U, with no programming or set-up required.

You can view a live demonstration of our IoT Platform here.
$99.00

LDS01 LoRaWAN Door/Window Sensor

The LDS01 is a LoRaWAN door/window sensor that detects open/close events and then sends its status it to a LoRaWAN network. The LDS01 is small (64 x 30 x 14mm) in size and is powered by a CR2032 coin battery. In ideal LoRaWAN network coverage conditions the LDS01 transmits approximately 12,000 data records to the server for the life of the battery. Poor LoRaWAN network coverage will allow for the transmission of roughly 1,300 data records. The LDS01 product design allows for one battery to last up to 2 years. Once flat, the CR2032 battery is straightforward to change.


Please note that all LoRaWAN IoT Sensor nodes supplied by Telemetry2U will work with 3rd party network/application servers, like TTN, but if you would like to use your sensors on Telemetry2U’s advanced, plug-and-play IoT Platform, then you will need to purchase a license by selecting from the drop-down box below. Products purchased with a license will be shipped with the latest firmware and configuration optimised for T2U, with no programming or set-up required.

You can view a live demonstration of our IoT Platform here.
$45.00

LDDS75 LoRaWAN Distance Detection Sensor

Based on the LSN50 Open Source platform, The waterproof (IP68) LDDS75 offers long range connections to LoRaWAN networks. The LDDS75 uses ultrasonic sensing to measures distances between 280-7500mm (in typical conditions, around 25C, 65%). Temperature compensation is performed internally to improve the reliability of data. The LDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, object proximity and presence detection, automatic control etc. Great for keeping an eye on your rain water tanks.


Please note that all LoRaWAN IoT Sensor nodes supplied by Telemetry2U will work with 3rd party network/application servers, like TTN, but if you would like to use your sensors on Telemetry2U’s advanced, plug-and-play IoT Platform, then you will need to purchase a license by selecting from the drop-down box below. Products purchased with a license will be shipped with the latest firmware and configuration optimised for T2U, with no programming or set-up required.

You can view a live demonstration of our IoT Platform here.
$129.00

LWL01 LoRaWAN Water Leak Sensor

The LWL01 is a LoRaWAN Water Leak sensor that detects water leak events and sends its status it to a LoRaWAN network. The LWL01 is small (64 x 30 x 14mm) in size and is powered by a CR2032 coin battery. In ideal LoRaWAN network coverage conditions, the LWL01 transmits approximately 12,000 data records to the server for the life of the battery. Poor LoRaWAN network coverage will allow for the transmission of roughly 1,300 data records. The LWL01 product design allows for one battery to last up to 2 years. Once flat, the CR2032 battery is straightforward to change.


Please note that all LoRaWAN IoT Sensor nodes supplied by Telemetry2U will work with 3rd party network/application servers, like TTN, but if you would like to use your sensors on Telemetry2U’s advanced, plug-and-play IoT Platform, then you will need to purchase a license by selecting from the drop-down box below. Products purchased with a license will be shipped with the latest firmware and configuration optimised for T2U, with no programming or set-up required.

You can view a live demonstration of our IoT Platform here.
$45.00

LSN50 V2 - Waterproof Wireless Node

The LSN50 V2 is an IP68 waterproof LoRaWAN node with an external antenna to reach extremely long ranges. This version is not supplied with a sensor, allowing users to customise their own sensor configurations for custom applications. With the pre-fitted cable gland and onboard Terminal Blocks, sensor installation is simple. It runs on an open source platform, with all design files available for reference and modification. The pre-loaded firmware has multiple running modes and input types that include; ADC's, I2C, digital inputs with interrupt and a counting input and supports many existing sensors.


Please note that all LoRaWAN IoT Sensor nodes supplied by Telemetry2U will work with 3rd party network/application servers, like TTN, but if you would like to use your sensors on Telemetry2U’s advanced, plug-and-play IoT Platform, then you will need to purchase a license by selecting from the drop-down box below. Products purchased with a license will be shipped with the latest firmware and configuration optimised for T2U, with no programming or set-up required.

You can view a live demonstration of our IoT Platform here.
$119.00