Dragino

The DLOS8 is an 8 channel outdoor LoRaWAN Gateway well suited for the Telemetry2U server, as well as other LoRaWAN applications, including the TTN. It lets you bridge a LoRaWAN wireless network to an IP network via WiFi, Ethernet, 3G or 4G. It comes with a mounting kit and an external 3dbi Antenna capable of >10km range at low data rates. It's compatible with all LoRaWAN nodes sold by Telemetry2U and comes loaded with the latest firmware, tested and pre-configured to work with perfectly with Telemetry2U's data servers and web interface.

The FT232RL USB-TTL Break out Board is a handy tool used to access the terminal on all nodes supplied by Telemetry2U. The terminal is used to both configure the nodes via well documented AT commands and in some cases, upgrade the firmware. A USB -A to Mini USB is required for connection to a PC. The FT232RL has an on board regulator delectable for 3.3V or 5V.

The LDS01 is a LoRaWAN door/window sensor that detects open/close events and then sends its status it to a LoRaWAN network. The LDS01 is small (64 x 30 x 14mm) in size and is powered by a CR2032 coin battery. In ideal LoRaWAN network coverage conditions the LDS01 transmits approximately 12,000 data records to the server for the life of the battery. Poor LoRaWAN network coverage will allow for the transmission of roughly 1,300 data records. The LDS01 product design allows for one battery to last up to 2 years. Once flat, the CR2032 battery is straightforward to change.

The LG308 is an 8 channel indoor LoRaWAN Gateway well suited for the Telemetry2U server, as well as other LoRaWAN applications, including the TTN. It lets you bridge a LoRaWAN wireless network to an IP network via WiFi, Ethernet, 3G or 4G. It is supplied with both an internal and external antenna and is capable of >10km range at low data rates. It is compatible with all LoRaWAN nodes sold by Telemetry2U and comes loaded with the latest firmware, tested and pre-configured to work with perfectly with Telemetry2U's data servers and web interface.

The Dragino LGT-92 LoRaWAN GPS tracker offers a low power GPS module combined with a 9-axis MEMS sensor (accelerator, gyroscope and compass). Its primary function is to provide motion detection and up-link the current GPS positions. It also has a emergency button that will immediately force an up-link when pressed. The power for both the GPS module and MEMS sensor are controlled by the MCU to achieve the best energy profile, but the power settings are user configurable.

The LHT65 is a long range LoRaWAN node that includes a built-in SHT20 temperature & humidity sensor and allows for easy interface with various external sensors. Telemetry2U offer multiple pre-configured options. Including a 1 meter waterproof temperature sensor, a 2 meter temperature sensor with a flat cable (ideal for fridges or freezers), a light sensor or a cable to interface to custom sensors with either an interrupt, ADC or counting sensor output. The LHT65 device is fitted with a button that can be used for power on/off control or to reset the device. LHT65 also comes with an LED to indicate connection status.