LTC2-LT - LoRaWAN Temperature Sensor with -200 to +200C

The Dragino LTC2-LT LoRaWAN Waterproof IoT Temperature Sensor is fitted with a 3-wire PT-100 temperature probe on a 2-meter cable. The probe is double pressed to the cable for a waterproof seal with anti-rust properties, making it suitable for air, object, or liquid temperature measurements, with a range of -200 to +200C with 0.5C accuracy. The node is fitted with an external antenna for extra-long range and the internal 8500mA battery can last up to 10-years with a modest 20-minute up-link interval and good signal strength to the LoRaWAN gateway.
$179.00 +GST
Availability: Out of stock
Ship to
Shipping Method
Estimated Delivery
No shipping options

The Dragino LTC2-LT is a long range LoRaWAN IoT node that provides spread spectrum communication and high interference immunity whilst minimizing power consumption. Its IP68 waterproof design makes it suitable for indoor or outdoor use. It is powered by a 8500mA Li/SOCl2 non-rechargeable battery. Due to its low power operation, users can expect years of operation with a moderate logging rate

It comes fitted with a 3-wire PT100 with a range of -200 to +200 degrees, making it perfect for general use, or for cold storage application like -80 freezers and dry ice that is commonly used for COVID-19 vaccination storage and transport.

There are also other probe options available, including a pipe bore, surface probe, food safety probe and a hole installation to permanently fix to surfaces like bearings etc.

The Dragino LTC2-LT can be configured with downlink commands or alternatively, you can configure your device with a FT232RL USB to TTL converter via a PC.  

Telemetry2U seamlessly integrates the Dragino LTC2-LT temperature sensor onto our IoT platform where you can not only see real-time data, but also historical data on charts, tables, reports and more.  You can easily configure alerts that will notify you via E-mail, SMS or even a voice call if the temperature moves past your limits.  This all makes it suitable for critical temperature monitoring applications - like minus -80 (ULT) freezers in hospitals or laboratories.

 Dragino LTC2-LT monitors Minus 80 (-80) ULT Freezer  on Telemetry2U

Please note that all LoRaWAN end-devices sensor's supplied by Telemetry2U will work with 3rd party network/application servers, like TTN, but if you would like to use your sensors on Telemetry2U’s advanced, plug-and-play IoT Platform, then you will need to purchase a license by selecting from the drop-down box. Products purchased with a license will be shipped with the latest firmware and configuration optimised for T2U, with no programming or set-up required. 


If you have any questions about how Telemetry2U can help you get your world on the IoT cloud, please get in touch with us today, we're here to help.

Attribute nameAttribute value
  • LoRaWAN v1.0.3 Class A
  • Ultra low power consumption
  • External 3m SHT31 probe
  • Measure range -200°C ~ +200°C
  • Bands: CN470/EU433/KR920/US915
  • AT Commands to change parameters
  • Downlink to change configure
  • Cold storage
  • -80 Freezers
  • Dry Ice
  • Ovens and Incubators
  • Liquid Temperature 
  • Range: -200 to + 200°C
  • Accuracy: ±0.5 @ 200-200 °C
  • Resolution: 0.01°C
Package contents
  • 1 x LTC2-LT-AU915 with PT100 fitted
  • 1 x External RF antenna 
Package contents
  • Device size: 130 x 50 x 45mm
  • Device weight: 150g
  • Package size: 150 x 120 x 55mm
  • Package weight: 180g

Download Directory