LoRaWAN Nodes

We supply proven and reliable LoRaWAN Sensor-Nodes for a huge range of applications. Each one is programmed and tested before shipment to ensure they work right out of the box with minimal installation requirements. Our network server receives raw data via the Gateways, where it is displayed on our front end in a user-friendly format with no programming necessary. Our Dragino RS485-LN node with RS485/MODBUS interface greatly extends your sensor possibilities by allowing you to connect to high end 3rd party sensors. Nodes are usually supplied with a factory calibration but our server can allow for NATA certified calibrations if requested. The calibration coefficients and history are stored on our server rather than the end-devices, ensuring the precious information is never lost with the details provided via our built-in Audit Reports. This allows you to track sensor changes over time. Most sensor-nodes are battery powered and you can expect 8-Years+ of operation with 20 minute sample intervals in good radio contact.

LHT65 LoRaWAN Temperature Probe with Various External Probe Options

The LHT65 is a long range LoRaWAN node that includes a built-in SHT20 temperature & humidity sensor and allows for easy interface with various external sensors. Telemetry2U offer multiple pre-configured options. Including a 1 meter waterproof temperature sensor, a 2 meter temperature sensor with a flat cable (ideal for fridges or freezers), a light sensor or a cable to interface to custom sensors with either an interrupt, ADC or counting sensor output. The LHT65 device is fitted with a button that can be used for power on/off control or to reset the device. LHT65 also comes with an LED to indicate connection status. The LHT65 will work with all LoRaWAN networks including the TTN. When used in conjunction with the Telemetry2U servers the complete system offers an easy to install, simple and effective real-time monitoring and data-logging system. T2U will cover all you monitoring requirement with features like a live dashboard, downloadable reports, email and SMS alerts and remote talk-back, just to name a few. Nodes come configured and optimised for the T2U servers when purchased from T2U.
$99.00

LT-22222-L LoRaWAN I/O Controller

The LT-22222-L is a Long Range LoRaWAN I/O Controller offering multiple I/O Interfaces including: analog current inputs 4-20mA), analog voltage inputs, digital inputs, digital outputs and relay outputs. The LT I/O Modules are designed to simplify the installation of I/O monitoring while providing excellent performance.
$79.00

RS485-LN RS485/Modbus to LoRaWAN Tranceiver

The RS485-LN is a long range LoRaWAN node that provides spread spectrum communications combined with high interference immunity, whilst minimising power consumption. With the abundance of RS485/Modbus sensors available on the market, the optically isolated RS485 transceiver combined with the 7-24 Volt input range makes it suitable for many applications. Set-up is made simple via the programming port. Users can configure up to 16 custom commands that run on a time schedule, making the RS485-LN capable of communicating with multiple RS485 devices. Sensor responses can be sent individually or combined into one data record.
$139.00

LSE01 LoRaWAN Soil Moisture & EC Sensor

The LSE01 is a LoRaWAN Soil Moisture & EC Sensor for Agriculture applications. It detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the the via wireless to LoRaWAN Network. .It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses the FDR method to calculate the soil moisture, with compensation for soil temperature and conductivity.
$239.00

LGT92 LoRaWAN GPS and Motion Tracker

The Dragino LGT-92 LoRaWAN GPS tracker offers a low power GPS module combined with a 9-axis MEMS sensor (accelerator, gyroscope and compass). Its primary function is to provide motion detection and up-link the current GPS positions. It also has a emergency button that will immediately force an up-link when pressed. The power for both the GPS module and MEMS sensor are controlled by the MCU to achieve the best energy profile, but the power settings are user configurable.
$99.00

LDS01 LoRaWAN Door/Window Sensor

The LDS01 is a LoRaWAN door/window sensor that detects open/close events and then sends its status it to a LoRaWAN network. The LDS01 is small (64 x 30 x 14mm) in size and is powered by a CR2032 coin battery. In ideal LoRaWAN network coverage conditions the LDS01 transmits approximately 12,000 data records to the server for the life of the battery. Poor LoRaWAN network coverage will allow for the transmission of roughly 1,300 data records. The LDS01 product design allows for one battery to last up to 2 years. Once flat, the CR2032 battery is straightforward to change.
$45.00

LDDS75 LoRaWAN Distance Detection Sensor

Based on the LSN50 Open Source platform, The waterproof (IP68) LDDS75 offers long range connections to LoRaWAN networks. The LDDS75 uses ultrasonic sensing to measures distances between 280-7500mm (in typical conditions, around 25C, 65%). Temperature compensation is performed internally to improve the reliability of data. The LDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, object proximity and presence detection, automatic control etc. Great for keeping an eye on your rain water tanks
$129.00

LWL01 LoRaWAN Water Leak Sensor

The LWL01 is a LoRaWAN Water Leak sensor that detects water leak events and sends its status it to a LoRaWAN network. The LWL01 is small (64 x 30 x 14mm) in size and is powered by a CR2032 coin battery. In ideal LoRaWAN network coverage conditions, the LWL01 transmits approximately 12,000 data records to the server for the life of the battery. Poor LoRaWAN network coverage will allow for the transmission of roughly 1,300 data records. The LWL01 product design allows for one battery to last up to 2 years. Once flat, the CR2032 battery is straightforward to change.

The LWL01 will work with all LoRaWAN networks including the TTN. When used in conjunction with the Telemetry2U servers the complete system offers an easy to install, simple and effective real-time monitoring and data-logging system. T2U will cover all you monitoring requirement with features like a live dashboard, downloadable reports, email and SMS alerts and remote talk-back, just to name a few. Nodes come configured and optimised for the T2U servers when purchased from T2U.
$45.00

LSN50 V2 - Waterproof Wireless Node

The LSN50 V2 is an IP68 waterproof LoRaWAN node with an external antenna to reach extremely long ranges. This version is not supplied with a sensor, allowing users to customise their own sensor configurations for custom applications. With the pre-fitted cable gland and onboard Terminal Blocks, sensor installation is simple. It runs on an open source platform, with all design files available for reference and modification. The pre-loaded firmware has multiple running modes and input types that include; ADC's, I2C, digital inputs with interrupt and a counting input and supports many existing sensors.

The LNS50 V2 will work with all LoRaWAN networks including the TTN. When used in conjunction with the Telemetry2U servers the complete system offers an easy to install, simple and effective real-time monitoring and data-logging system. T2U will cover all you monitoring requirement with features like a live dashboard, downloadable reports, email and SMS alerts and remote talk-back, just to name a few. Nodes come configured and optimised for the T2U servers when purchased from T2U.
$119.00